Chery T21 2014 Service Manual page 1028

22 - AXLE
Rear Sub Frame Assembly
Removal
WARNING
 Be sure to wear necessary safety equipment to prevent accidents.
 Check if safety lock of lifter is locked when repairing chassis parts.
 It is not permitted to weld or modify bearing parts of wheel suspension and guide parts of wheel.
 When removing chassis parts, replace the self-locking nuts and rusted nuts for safety.
1. Remove the rear wheel
2. Remove the center exhaust pipe assembly
3. Remove the rear sub frame assembly.
a. Remove the coupling bolts and nuts (arrow) between
rear suspension upper left swing arm assembly and
rear sub frame assembly. Use the same procedure to
remove the right side. 
(Tightening torque: 120 ± 10 N·m)
b. Remove the coupling bolt and nut (arrow) between
rear suspension lower left swing arm assembly and
rear sub frame assembly. Use the same procedure to
remove the right side. 
(Tightening torque: 120 ± 10 N·m)
c. Remove 2 coupling bolts and 2 coupling nuts (arrow)
between rear sub frame assembly and body.
(Tightening torque: 120 ± 10 N·m)
22
d. Remove the rear sub frame assembly.
20
22–
(See page 24-9).
(See page 11-15).
Chery Automobile Co., Ltd.
RT21220330
RT21220340
RT21220350