Power Steering Pump Assembly
Removal
ENVIRONMENTAL PROTECTION
Collect steering fluid flowing from the line with a container when disconnecting the line.
1. Drain steering fluid
(See page
2. Remove the accessory drive belt
3. Remove the power steering pump with bracket assembly.
a. Remove the high pressure fluid pipe joint hollow bolt
(1).
(Tightening torque: 45 ± 5 N·m)
b. Loosen the elastic clamp (2), and disconnect the
connection between fluid suction pipe and power
steering pump assembly.
CAUTION
Using a plug, clog the disconnected steering system line to prevent foreign matter from entering.
c. Remove 3 fixing bolts (1), (2) and (3) from the steering
pump bracket and the fixing bolt (arrow) from the idler
pulley.
(Tightening torque for steering pump bracket fixing
bolt: 25 ± 3 N·m)
(Tightening torque for idler pulley fixing bolt: 50 ± 5
N·m)
Chery Automobile Co., Ltd.
29-7).
(See page
07-24).
29 - HYDRAULIC ASSIST STEERING
1
2
RT21290022
3
2
1
RT21290130
29–
29
17