Chery T21 2014 Service Manual page 1025

Front Sub Frame Welding Assembly
Removal
WARNING
 Be sure to wear necessary safety equipment to prevent accidents.
 Check if safety lock of lifter is locked when repairing chassis parts.
 It is not permitted to weld or modify bearing parts of wheel suspension and guide parts of wheel.
 When removing chassis parts, replace the self-locking nuts and rusted nuts for safety.
 When removing front sub frame welding assembly, an engine equalizer needs to be used to support
engine and transmission assembly securely to prevent them from being damaged.
1. Remove the front wheel
2. Remove the front control arm assembly
3. Remove the front sub frame welding assembly.
a. Using an engine equalizer, support the engine and transmission assembly securely. Use the same
procedure to remove the right side.
b. Remove 2 coupling bolts (arrow) between front left
stabilizer bar and front sub frame welding assembly.
(Tightening torque: 20 ± 3 N·m)
c. Remove 2 coupling bolts and a nut (arrow) between
side rail welding assembly and rear mounting cushion
assembly.
(Tightening torque: 70 ± 5 N·m)
d. Remove 2 coupling bolts (arrow) between front sub
frame welding assembly and steering gear assembly.
(Tightening torque: 120 ± 10 N·m)
Chery Automobile Co., Ltd.
(See page 24-9).
(See page 23-20).
22 - AXLE
RT21220230
RT21220220
22
RT21220240
17
22–