31 - AIR CONDITIONING
Mode Damper Servo Motor
Removal
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the mode damper servo motor.
a. Disconnect the mode damper servo motor connector
(arrow).
31
b. Detach the fixing claw, and remove the mode damper
servo motor (arrow) from the evaporator tank
assembly carefully.
Installation
Installation is in the reverse order of removal.
CAUTION
When installing, apply a small amount of grease to the contact surface between mode damper servo
motor lever and mode damper adjustment mechanism set to ensure the motor operates smoothly.
76
31–
Chery Automobile Co., Ltd.
RT21310220
RT21310230