Chery T21 2014 Service Manual page 1239

Parking Brake Rear Cable Assembly
Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
1. Remove the rear wheel
2. Remove the auxiliary fascia console assembly
3. Remove the parking brake rear cable assembly.
a. Fully release the parking brake control mechanism.
b. Loosen the locking nut (arrow) of parking brake
control mechanism assembly to release the tension of
parking brake cable assembly as shown in the
illustration.
c. Disengage the parking brake rear cable assembly
from two grooves (arrow) on the rear of parking brake
front cable assembly.
d. Loosen the coupling bolts (arrow) between parking
brake rear cable assembly fixing bracket and body,
and disengage the cable fixing bracket.
(Tightening torque: 23 ± 2 N·m)
Chery Automobile Co., Ltd.
(See page 24-9).
(See page 45-9).
27 - PARKING BRAKE
RT21270030
RT21270080
RT21270090
27
13
27–