Chery T21 2014 Service Manual page 859

Primary/Secondary Shaft Pressure Sensor Inspection
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the primary/secondary shaft pressure sensor
connector.
3. Check for resistance between the terminals of primary/secondary shaft pressure sensor as shown in the
table below at normal temperature.
HINT:
The inner parts of the sensor are triode and capacitor, and will be affected greatly by the environment and the
usage condition. Therefore, the actual measured value is within the specified value plus/minus 15% in the
table below.
Item
Primary/Secondary Shaft Pressure
Sensor
Chery Automobile Co., Ltd.
Multimeter Connection
1 - 3
2 - 1
18 - QR019CHB CVT
RT21180280
RT21180290
Specified Condition (KΩ)
45.77
10.06
18–
18
25