Differential Planetary Gear
Removal
1. Remove the differential
2. Remove the differential planetary gear.
a. Tap out the dowel pin (2) with a punch (1).
b. Remove the planetary gear shaft (1), planetary gear
(2) and drive shaft gear (3).
Installation
Installation is in the reverse order of removal.
CAUTION
Adjust clearance until the gear clearances of both sides are the same during installation.
The drive shaft gears and planetary gears should operate normally after tapping in the dowel pin.
Differential Parts Inspection
1. Clean all the components.
2. Check the following components for wear:
Driven gear of final drive
Planetary gear washer
Drive shaft gear
Planetary gear
Planetary gear shaft
Drive shaft gear washer
Chery Automobile Co., Ltd.
(See page
17-22).
21 - DIFFERENTIAL
1
3
2
RA19200060
1
2
RT21210070
21
9
21–