Chery T21 2014 Service Manual page 1054

23 - SUSPENSION
Front Stabilizer Bar Assembly
Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents.
 Make sure that safety lock of lifter has been locked when removing and installing chassis parts.
 It is not permitted to weld or modify suspension bearing parts.
 When removing and installing chassis parts, replace self-locking nuts and rusted nuts for safety.
 When lowering front sub frame welding assembly, it needs to support engine and transmission assembly
securely with a engine equalizer to avoid damage.
1. Remove the front wheel
2. Remove the precatalytic converter assembly
3. Remove the front control arm assembly
4. Remove the front stabilizer bar assembly.
a. Support the engine and transmission assembly securely with a engine equalizer.
b. Hold the lower end of front link assembly with an inner
hexagon wrench, remove the coupling nut (arrow)
between front stabilizer bar and front link assembly
with a fixing wrench and disengage the front link
assembly.
(Tightening torque: 45 ± 5 N·m)
c. Remove 2 coupling bolts and nut (arrow) between
side rail welding assembly and rear mounting cushion
assembly.
(Tightening torque: 70 ± 5 N·m)
d. Remove 2 coupling bolts (arrow) between front sub
23
frame welding assembly and steering gear assembly.
(Tightening torque: 120 ± 10 N·m)
24
23–
(See page 24-9).
(See page
(See page
11-10).
23-20).
Chery Automobile Co., Ltd.
RT21230240
RT21220220
RT21220240