08 - SQR484F FUEL SUPPLY SYSTEM
Filler Tube Assembly
Removal
WARNING
Before operating fuel supply system, please touch vehicle body to discharge static electricity; failure to
do so will cause a fire, even result in an explosion.
When operating fuel supply system, work area should be in good ventilation and keep fire sources or
open flames away from the work area, in which the fire extinguisher should be equipped.
If fuel leakage occurs when operating fuel supply system, please handle the leaked fuel in time.
CAUTION
Be sure to wear necessary safety equipment when repairing to prevent accidents.
Try to prevent body paint surface from being scratched during removal and installation.
08
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the C-pillar lower right protector assembly
4. Remove the fuel filler door assembly.
a. Open the fuel filler door, turn the fuel tank cap in the
direction of arrow as shown in the illustration.
b. Remove the fuel tank cap assembly (1) from fuel filler
door hinge assembly.
c. Remove the fuel filler door outer cover plate (2) from
fuel filler door hinge assembly in the direction of arrow
as shown in the illustration.
18
08–
(See page
49-23).
1
Chery Automobile Co., Ltd.
RT21080110
2
RT21080120