Chery T21 2014 Service Manual page 1271

Disassembly
1. Remove the coupling bolt (arrow) between electronic
power steering column and intermediate shaft.
(Tightening Torque: 50 N·m)
Inspection
1. Check if electronic controller is normal. Replace the electronic controller if necessary.
2. Check steering column assembly for wear, cracks or deformation, and welding or correction is not allowed.
Replace the steering column assembly if necessary.
3. Check steering column bearing for looseness, wear or sticking. Replace the steering column assembly if
necessary.
Assembly
Assembly is in the reverse order of disassembly.
Installation
Installation is in the reverse order of removal.
CAUTION
 Before installing steering column assembly, slide the spline at lower part of steering column assembly
onto intermediate shaft upper universal joint first.
 Tighten the fixing nuts, bolts and screws in place.
 Install each connector in place.
Chery Automobile Co., Ltd.
28 - STEERING COLUMN
RT21280280
23
28–
28