Chery T21 2014 Service Manual page 507

38.Remove the crankshaft.
a. Evenly loosen and remove 10 crankshaft frame fixing
bolts in the order shown in the illustration. 
(Tightening torque: 20 + 3 N·m)
b. Evenly loosen and remove 10 crankshaft main
bearing cap fixing bolts in the order shown in the
illustration. 
(Tightening torque: 1st step: tighten to 45 ± 5 N·m;
2nd step: retighten for 180° ± 10°)
c. Remove the crankshaft frame.
HINT:
If it is difficult to remove the crankshaft frame due to seal gum, tap it gently with a rubber hammer to
make it loose. Be sure not to damage surrounding components.
d. Take out the crankshaft.
CAUTION
 Take care when removing crankshaft, as it is heavy. If necessary, ask other operators to assist.
 Take particular care when removing crankshaft. Avoid scratching the contact surface of crankshaft and
bearing shell.
39.Remove the crankshaft thrust washer.
a. Remove the crankshaft thrust washers (arrow) from
cylinder block.
Chery Automobile Co., Ltd.
07 - SQR484F ENGINE MECHANICAL
4 8 9 5
3 7 10 6
9
4 8 5
3 7 6
10
1
1
2
RT21070990
1
07
2
RT21071000
RT21071010
85
07–