Chery T21 2014 Service Manual page 949

Secondary Shaft Speed Sensor
Removal
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the air filter (See page
4. Disconnect the secondary shaft speed sensor wire
harness connector (arrow).
5. Remove the fixing bolt (1) of the secondary shaft speed
sensor and take out the secondary shaft speed sensor
(2).
(Tightening torque: 10 - 12 N·m)
Installation
Installation is in the reverse order of removal.
CAUTION
 Keep clean of sensor and contact surface between sensor and transmission, and avoid dust or impurity
entering the transmission.
 During installation, apply automatic transmission fluid on the O ring of the sensor.
Chery Automobile Co., Ltd.
10-17).
18 - QR019CHB CVT
1
2
RT21180380
18–
18
115