Chery T21 2014 Service Manual page 727

Repair or replace ground wire harness or
NG
ground point
3
Check wire harness (battery - engine compartment fuse and relay box)
a. Remove the IGN1 relay, IGN2 relay and ACC relay from engine compartment fuse and relay box.
b. Connect the negative battery cable.
c. Turn the digital multimeter to DC voltage band to check if voltage output from the terminal 30 of relay is 
12 V.
Repair or replace wire harness (battery -
NG
engine compartment fuse and relay box)
4
Check engine compartment wire harness
a. Check the wire harness between engine compartment
fuse and relay box connector E-069 and engine
compartment wire harness connector E-071.
Check for Open
Multimeter
Condition
Connection
E-069 (F5) -
E-071 (10)
E-069 (F17) -
E-071 (8)
Check for Short
Multimeter
Condition
Connection
E-069 (F5) or
E-071 (10) - Body
ground
E-069 (F17) or
E-071 (8) - Body
ground
E-069 (F5) or
E-071 (10) -
Battery positive
E-069 (F17) or
E-071 (8) -
Battery positive
Chery Automobile Co., Ltd.
Specified
Condition
Always Continuity
Always Continuity
Specified
Condition
Always No continuity
Always No continuity
Always No continuity
Always No continuity
15 - SQR484F STARTING SYSTEM
+ -
F12 F11 F10 F9 F8 F7 F6 F5
F24 F23 F22 F21 F20 F19 F18 F17
E-069
1 2 3 4
7 8 9 10 11 12 13 14
E-071
OK
OK
F4 F3 F2 F1
15
F16 F15 F14 F13
5 6
RT21150300
43
15–