Chery T21 2014 Service Manual page 1060

23 - SUSPENSION
Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents.
 Make sure that safety lock of lifter has been locked when removing and installing chassis parts.
 It is not permitted to weld or modify suspension bearing parts.
 When removing and installing chassis parts, replace self-locking nuts and rusted nuts for safety.
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
1. Remove the rear left shock absorber assembly.
a. Remove the coupling bolt and washer (arrow)
between lower part of rear left shock absorber
assembly and rear left trailing arm Assembly.
(Tightening torque: 45 ± 5 N·m)
b. Lift up the rear floor carpet, remove the rear left shock
absorber assembly service hole cover.
c. Remove the coupling nut (arrow) between upper part
of rear left shock absorber assembly and body.
(Tightening torque: 45 ± 5 N·m)
23
30
23–
Chery Automobile Co., Ltd.
RT21230280
RT21230290
RT21230300