Chery T21 2014 Service Manual page 1268

28 - STEERING COLUMN
2. Install the ignition key cylinder.
a. Push the ignition key cylinder into the ignition switch
lock body until the ignition key cylinder fixing block
locks in place.
28
b. Check the ignition key cylinder for proper operation. When the key is removed, steering lock is locked;
when the key is inserted and ignition switch is turned to ACC or ON, steering lock is unlocked.
Installation
Installation is in the reverse order of removal.
CAUTION
 Before installing steering column assembly, slide the spline at lower part of steering column assembly
onto intermediate shaft upper universal joint first.
 Tighten the fixing nuts, bolts and screws in place.
 Install each connector in place.
20
28–
Chery Automobile Co., Ltd.
RT21280211