26 - BRAKE
b. Disengage the fixing clamp (arrow) and loosen the
coupling plug (1) between rear brake hose assembly
and brake pipe.
(Tightening torque: 16 ± 2 N·m)
CAUTION
DO NOT bend or damage brake tube.
DO NOT allow any foreign matter such as dirt and dust to enter brake tube from joint parts.
After removing brake line, perform sealing treatment to prevent foreign matter from entering.
c. Remove the rear brake hose assembly.
Installation
Installation is in the reverse order of removal.
CAUTION
Make sure to tighten bolt and plug in place.
Be sure to check brake system for leakage after installation. Repair or replace malfunctioning parts as
necessary.
Be sure to perform bleeding procedures for brake system after installation.
Be sure to add brake fluid to the proper level after installation.
26
52
26–
1
Chery Automobile Co., Ltd.
RT21260700