Installation
1. Loosen steering wheel adjusting handle, and adjust steering column assembly to the uppermost position,
then tighten the adjusting handle to the uppermost position.
2. Insert steering column lower cover from right side of ignition switch at an angle, and then install the
adjusting handle into the cover hole.
3. After adjusting lower cover, install upper cover and fix upper and lower cover clips in place, then install the
self-tapping screws.
CAUTION
Tighten the self-tapping screws in place.
Operate carefully to prevent damage to components during installation.
Chery Automobile Co., Ltd.
28 - STEERING COLUMN
15
28–
28