Chery T21 2014 Service Manual page 1136

25 - BRAKE CONTROL SYSTEM
Check wire harness and connector (front right wheel speed sensor - ABS control module
5
assembly)
a. Turn ignition switch to LOCK.
b. Disconnect the negative battery cable.
c. Disconnect the ABS control module assembly connector
E-085.
d. Disconnect the front right wheel speed sensor connector
E-036.
e. Using a digital multimeter, check for continuity between
the terminals of connector E-085 and connector E-036 to
check if there is an open in the wire harness and
connector according to the table below.
Standard Condition
Multimeter
Connection
E-085 (16) -
E-036 (1)
E-085 (4) -
E-036 (2)
E-085 (16) -
E-036 (2)
E-085 (4) -
E-036 (1)
E-036 (1) -
E-036 (2)
E-085 (4) -
E-085 (16)
f. Using a digital multimeter, check for continuity between
connector E-085 and body ground to check if the front
right wheel speed sensor is short to ground according to
the table below.
Standard Condition
Multimeter
Connection
E-085 (4) - Body
ground
E-085 (16) - Body
ground
25
40
25–
Specified
Condition
Condition
Always Continuity
Always Continuity
Always No continuity
Always No continuity
Always No continuity
Always No continuity
Specified
Condition
Condition
Always No continuity
Always No continuity
+ -
12 11 10 9 8 7 6 5 4 3 2
13
24 23 22 21 20 19 18 17 16 15 14
38
37 36 35 34 33 32 31 30 29 28 27 26
E-085
1 2
E-036
+ -
12 11 10 9 8 7 6 5 4 3 2
13
24 23 22 21 20 19 18 17 16 15 14
38
37 36 35 34 33 32 31 30 29 28 27 26
E-085
Chery Automobile Co., Ltd.
1
25
RT21250260
1
25
RT21250270