Chery T21 2014 Service Manual page 1351

3
Check wire harness and connector (HVAC control panel assembly - sun sensor)
a. Turn ignition switch to LOCK.
b. Disconnect the negative battery cable.
c. Disconnect the HVAC control panel assembly connector
K-012 and sun sensor connector I-021.
d. Using a digital multimeter, check for continuity between
terminals of connector K-012 and connector I-021 to
check if there is an open in system according to the table
below.
Standard Condition
Multimeter
Condition
Connection
K-012 (36) -
I-021 (3)
K-012 (37) -
I-021 (1)
K-012 (30) -
I-021 (4)
e. Disconnect the A/C wire harness connector K-007 and
instrument panel wire harness connector I-039.
f. Using a digital multimeter, check for continuity between
terminals of connector K-012 and connector K-007 to
check if there is an open in system according to the table
below.
Standard Condition
Multimeter
Condition
Connection
K-012 (36) -
K-007 (5)
K-012 (37) -
K-007 (6)
K-012 (30) -
K-007 (16)
Chery Automobile Co., Ltd.
Specified
Condition
Always Continuity
Always Continuity
Always Continuity
Specified
Condition
Always Continuity
Always Continuity
Always Continuity
31 - AIR CONDITIONING
+ -
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
K-012
4 3 2 1
I-021
+ -
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
K-012
1 2 3 4
5 6 7 8 9
10 11 12 13 14
15 16 17 18 19
20 21 22
K-007
31
RT21311000
RT21311010
25
31–