17 - QR525MHE TRANSMISSION
ON-VEHICLE SERVICE
Transmission Oil
Replacement
CAUTION
Replace transmission oil only when engine stops and transmission cools down.
Before installation, replace drain/retaining plug washer with a new one.
1. Turn off all the electrical equipment and ignition switch.
2. Raise the vehicle to a proper height.
3. Place a recovering container under the transmission drain hole.
4. Using a wrench, loosen the transmission retaining plug
(arrow).
5. Using a wrench, loosen the transmission filler plug
(arrow). Replace the drain plug washer and tighten the
drain plug after draining transmission oil.
(Tightening torque: 40 ± 6 N·m)
17
6. Fill transmission oil.
CAUTION
Only use transmission oil approved by Chery Automobile Co., Ltd.
a. Make sure that transmission drain plug has been tightened in place.
14
17–
Chery Automobile Co., Ltd.
RT21170040
RT21170050