Chery T21 2014 Service Manual page 1198

26 - BRAKE
4. Adjust brake pedal height.
a. As shown in the illustration, loosen the vacuum booster
pushrod locking nut (arrow) and rotate the vacuum
booster pushrod clockwise or counterclockwise to
adjust brake height to the specified value.
Removal
1. Remove the brake light switch assembly.
a. Disconnect the brake light switch assembly wire
harness connector (arrow).
b. Remove the brake light switch assembly by rotating it
90° clockwise or counterclockwise.
2. Remove the brake pedal assembly.
a. Using needle-nose pliers, remove the locking pin
(arrow) and pushrod pin (1) from vacuum booster
pushrod, and detach the brake pedal assembly.
26
24
26–
1
Chery Automobile Co., Ltd.
RT21260240
RT21260260
RT21260270
RT21260190