20 - DRIVE SHAFT
Inner Ball Cage
Disassembly
HINT:
Use the same disassembly and assembly procedures for left and right drive shaft assemblies.
CAUTION
DO NOT put matchmarks on the rotating surface of rotary drum.
Operate carefully to prevent the dust boot from being damaged.
1. Remove the drive shaft assembly
2. Remove the inner ball cage dust boot clamp.
a. Using needle nose pliers, remove the inner ball cage
dust boot clamps.
3. Remove the inner ball cage.
a. Separate the dust boot from inner ball cage in the
direction of arrow.
20
8
20–
(See page
20-5).
Chery Automobile Co., Ltd.
RT21200040
RT21200051