Rear Brake Hose Assembly
Removal
CAUTION
Be sure to wear necessary safety equipment to prevent accidents when repairing.
Try to prevent body paint surface from being scratched during removal and installation.
HINT:
Use the same procedures for the right side and left side.
Procedures listed below are for the left side.
1. Drain the brake fluid
(See page
CAUTION
Wash off brake fluid immediately if it comes in contact with any paint surface.
ENVIRONMENTAL PROTECTION
Drained brake fluid should be well kept in a container. Never discard it at will.
2. Remove the rear left brake hose assembly.
a. Remove the coupling bolt and washer (arrow)
between rear left brake caliper assembly and rear left
brake hose assembly.
(Tightening torque: 20 ± 2 N·m)
CAUTION
DO NOT allow brake fluid to be sprayed on your clothes or skin when removing brake hose, as the brake
fluid is corrosive.
Chery Automobile Co., Ltd.
26-13).
26 - BRAKE
RT21260540
26
51
26–