Chery T21 2014 Service Manual page 858

18 - QR019CHB CVT
Turbine/Secondary Shaft Speed Sensor Inspection
1. Turn off all the electrical devices and ignition switch.
2. Disconnect the turbine/secondary shaft speed sensor
connector.
3. Check for resistance between the terminals of turbine/secondary shaft speed sensor as shown in the table
below at normal temperature.
HINT:
The inner parts of the sensor are triode and capacitor, and will be affected greatly by the environment and
usage condition. Therefore, the actual measured value is within the specified value plus/minus 15% in the
table below.
Item
18
Turbine/Secondary Shaft Speed
Sensor
24
18–
Multimeter Connection
+ -
1 3
3 1
1 2
3 2
Chery Automobile Co., Ltd.
RT21180260
RT21180270
Specified Condition
(MΩ)
3.397
6.79
1.77
11.9