Disposal
WARNING
Shock absorber assembly contains nitrogen and oil, which are under negative pressure. Before handling,
be sure to wear goggles and release pressure inside the shock absorber assembly to avoid personal
injury.
1. Disposal of the front shock absorber assembly.
a. Extend the front shock absorber assembly strut fully, and clamp it in a vise at an angle.
b. Using a drill or equivalent, make a hole slowly at area
A shown in the illustration to discharge the gas in the
front shock absorber assembly.
CAUTION
Gas discharged from shock absorber is colorless and harmless. Be careful when drilling, because metal
chips may fly out.
c. Handle the front shock absorber assembly properly after discharging the gas.
ENVIRONMENTAL PROTECTION
Recycle disposed front shock absorber assembly according to local environmental regulations.
Chery Automobile Co., Ltd.
23 - SUSPENSION
A
RT21230190
19
23–
23