Chery T21 2014 Service Manual page 1017

ON-VEHICLE SERVICE
Front Hub Assembly
Removal
WARNING
 Be sure to wear necessary safety equipment to prevent accidents.
 Check if safety lock of lifter is locked when repairing chassis parts.
 It is not permitted to weld or modify bearing parts of wheel suspension and guide parts of wheel.
 When removing chassis parts, replace the self-locking nuts and rusted nuts for safety.
HINT:
 Use the same procedures for the right side and left side.
 Procedures listed below are for the left side.
1. Remove the front left wheel
2. Remove the front drive shaft assembly locking nut.
a. Using a nut chisel and a hammer, loosen the staked
part of nut.
CAUTION
 Loosen staked part of nut completely, otherwise it will damage the thread of drive shaft assembly.
b. Remove the front drive shaft assembly locking nut
(arrow) while applying the brakes securely.
(Tightening torque: 300 ± 20 N·m)
Chery Automobile Co., Ltd.
(See page 24-9).
22 - AXLE
RT21220050
22
RT21220060
9
22–