25 - BRAKE CONTROL SYSTEM
Repair or replace wire harness and
NG
connector between rear left wheel speed
sensor and ABS control module assembly
6
Reconfirm DTCs
a. Use X-431 3G diagnostic tester to clear the DTC.
b. Start the engine.
c. Drive the vehicle at 15 km/h or more, read the ABS control module assembly DTC again with X-431 3G
diagnostic tester.
d. Check if the same DTC is output.
System operates normally
NO
Replace ABS control module assembly
25
48
25–
Chery Automobile Co., Ltd.
OK
YES