Chery T21 2014 Service Manual page 627

CAUTION
 If there is no coolant in expansion tank after the engine just starts, perform the followings:
- Stop engine;
- Wait until coolant cools down;
- Add coolant to "MAX" line on expansion tank.
 Run the engine at 2500 rpm until the coolant level becomes stable.
3. Stop the engine and wait until the coolant temperature drops to the ambient temperature. Check that the
coolant level is between "MAX" and "MIN" lines. If the coolant level is below the "MIN" line, repeat all
above procedures. If the coolant level is above the "MAX" line, drain the coolant until the level is between
"MAX" and "MIN" lines.
Chery Automobile Co., Ltd.
12 - SQR484F COOLING SYSTEM
12–
12
15