Chery T21 2014 Service Manual page 945

Inspection
1. After the vehicle runs for 5 min, the temperature will reach the normal working conditions (ATF temperature
60 - 80°C, and the engine coolant temperature 80 - 100°C).
2. Park the vehicle on a flat ground and pull the parking brake lever.
3. Start engine to make it run at idle speed, and then fully depress the brake pedal and move the shift lever
for five times at each gear. Finally, place the lever at "P" or "N" position.
4. Pull out the automatic transmission fluid dipstick and
clean it with a piece of non-wool paper; then insert the
dipstick into the filling pipe as much as possible and then
take out to observe whether it reaches the "HOT"
position.
Chery Automobile Co., Ltd.
18 - QR019CHB CVT
RT21180200
18
111
18–