Chery T21 2014 Service Manual page 1400

31 - AIR CONDITIONING
Blower Speed Resistor
Removal
WARNING
 During normal operation, the blower speed resistor may be very hot. Turn off the blower and wait for a
few minutes to cool the blower speed resistor before diagnosing or servicing, in order to avoid burns.
31
CAUTION
 DO NOT operate the blower assembly when removing blower speed resistor from vehicle. Failure to do
so may result in damage to the blower assembly.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the blower speed resistor.
a. Disconnect the blower speed resistor connector
(arrow).
b. Detach the fixing claw (arrow) from the blower speed
resistor.
c. Remove the blower speed resistor.
Installation
Installation is in the reverse order of removal.
74
31–
Chery Automobile Co., Ltd.
RT21310160
RT21310170