Chery T21 2014 Service Manual page 1424

31 - AIR CONDITIONING
c. Disengage the fixing clamp (arrow) between A/C high
pressure line II and coolant circulation line.
31
d. Remove the fixing bolt (arrow) between A/C high
pressure line II and compressor assembly, and
disengage the A/C high pressure line II from the
compressor assembly.
(Tightening torque: 25 ± 2.5 N·m)
e. Remove the A/C high pressure line II (compressor to condenser).
Installation
Installation is in the reverse order of removal.
CAUTION
 Tighten fixing bolts and fixing nuts to specified torque.
 It is necessary to replace the refrigerant line O-ring when installing the refrigerant line. Failure to do so
may result in refrigerant leaks.
 Lubricate the new rubber O-ring with clean refrigerant oil and install it to the refrigerant line joint.
 Only use the specified O-ring, as it is made of special materials for R134a system.
 Only use recommended refrigerant oil which is applicable to the A/C compressor assembly on vehicle.
 Perform recharging for the A/C system and check refrigerant for leakage.
98
31–
Chery Automobile Co., Ltd.
RT21310830
RT21310840