Chery T21 2014 Service Manual page 1324

30 - ELECTRONIC POWER STEERING
8. Remove steering gear assembly.
Inspection
1. Check the steering gear dust boot for damage and the clamp for looseness. Replace them if necessary.
Otherwise, it is easy for water and dust to enter, and cause parts failure prematurely.
2. Check the steering gear for damage. Replace the power steering gear if necessary.
Installation
Installation is in the reverse order of removal.
30
HINT:
When installing the coupling bolt between the steering column lower universal joint and the steering gear input
shaft, it is necessary to assemble it reliably.
CAUTION
 Perform the front wheel alignment procedure after installing the steering gear
(See page 23-50).
26
30–
Chery Automobile Co., Ltd.