Chery T21 2014 Service Manual page 1430

31 - AIR CONDITIONING
Installation
Installation is in the reverse order of removal.
CAUTION
 When installing condenser assembly (w/receiver drier), be sure to align the upper part of it with the
positioning hole of tank upper crossmember fixing bracket.
 When installing the condenser assembly (w/receiver drier), be sure to align the lower part of it with the
positioning hole of tank lower crossmember.
 It is necessary to replace the refrigerant line O-ring when installing the refrigerant line. Failure to do so
may result in refrigerant leaks.
31
 Lubricate the new rubber O-ring with clean refrigerant oil and install it to the refrigerant line joint.
 Only use the specified O-ring, as it is made of special materials for R134a system.
 Only use recommended refrigerant oil which is applicable to the A/C compressor assembly on vehicle.
 Perform recharging for the A/C system and check refrigerant for leakage.
104
31–
Chery Automobile Co., Ltd.