Chery T21 2014 Service Manual page 578

10 - SQR484F INTAKE SYSTEM
Air Filter Element
Removal
CAUTION
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the air filter element.
a. Loosen the worm clamp (arrow) and disconnect the
connection between rear intake hose and hot wire air
flow meter.
(Tightening torque: 5 ± 0.5 N·m)
b. Disconnect the hot wire air flow meter connector (1).
10
c. Move the inlet pipe II assembly (1) and fuel vapor tube
III assembly (2) from the pipe clamp on the air filter
upper housing.
d. Remove 2 coupling screws (arrow) between air filter
upper housing and lower housing. 
(Tightening torque: 1.3 ± 0.2 N·m)
e. Remove the air filter upper housing.
14
10–
1
2
Chery Automobile Co., Ltd.
1
RT21100090
RT21100100
RT21100110