Disposal
1. Disposal of the rear shock absorber assembly.
a. Extend the rear shock absorber assembly strut fully.
b. Using a drill, make a hole between A and B in the strut
as shown in the illustration to discharge the gas inside
the rear shock absorber assembly.
CAUTION
Be careful when drilling, because metal chips may fly about. Always perform operations with proper
safety equipment to avoid personal injury.
The gas is colorless, odorless and nonpoisonous.
c. After discharging the gas inside the rear shock absorber assembly, handle the rear shock absorber
assembly properly.
ENVIRONMENTAL PROTECTION
Recycle disposed rear shock absorber assembly according to local environmental regulations.
Chery Automobile Co., Ltd.
23 - SUSPENSION
A
B
RT21230360
23
33
23–