Chery T21 2014 Service Manual page 845

Oil Pressure Control Solenoid
The input and output pulley shaft oil pressure control
solenoids (1) and (2) are installed on the valve body. The
TCU receives accelerator pedal signals, gear signals and
speed signals, then the TCU sends the operation
requirements to start the oil pressure control solenoid for
changing speed ratio of the CVT.
Clutch Pressure Control Solenoid
The clutch pressure control solenoid (1) is installed on the
valve body. The TCU receives accelerator pedal signals,
gear signals and speed signals, then the TCU sends the
operation requirements to start the clutch pressure control
solenoid for changing clutch engagement.
Torque Converter Pressure Control Solenoid
The torque converter pressure control solenoid (1) is
installed on the valve body. The TCU receives accelerator
pedal signals, gear signals and speed signals, then the TCU
sends the operation requirements to start the torque
converter pressure control solenoid for locking the torque
converter.
Gear Shift Lock Solenoid
The gear shift lock solenoid (arrow) is installed in the
transmission gear shift control mechanism. Before moving
out of the "P" gear, the brake pedal should be fully
depressed and the ignition switch set to the "ON" position.
Chery Automobile Co., Ltd.
18 - QR019CHB CVT
1 2
RT21180140
1
RT21180150
RT21180160
RT21180170
18–
18
11