23 - SUSPENSION
Rear Trailing Arm Assembly
Removal
CAUTION
Be sure to wear necessary safety equipment to prevent accidents.
Make sure that safety lock of lifter has been locked when removing and installing chassis parts.
It is not permitted to weld or modify suspension bearing parts.
When removing and installing chassis parts, replace self-locking nuts and rusted nuts for safety.
HINT:
Use the same procedures for the right side and left side.
Procedures listed below are for the left side.
1. Remove the rear left wheel
2. Remove the rear left brake caliper assembly
3. Remove the rear left brake disc
4. Remove the rear left axle hub bearing unit
5. Remove the rear left trailing arm assembly.
a. Remove 2 coupling bolts (arrow) between rear left
shock absorber assembly fixing bracket and rear left
trailing arm assembly.
(Tightening torque: 80 ± 8 N·m)
b. Remove the coupling bolt and nut (arrow) between
lower part of rear suspension lower left swing arm
assembly and rear left trailing arm assembly.
(Tightening torque: 120 ± 10 N·m)
23
40
23–
(See page
24-9).
(See page
(See page
26-41).
(See page
26-41).
22-19).
Chery Automobile Co., Ltd.
RT21230380
RT21230390