Chery T21 2014 Service Manual page 502

07 - SQR484F ENGINE MECHANICAL
Disassembly
1. Remove the engine assembly and install the engine on engine service platform
2. Remove the high-voltage cables
3. Remove the ignition coil
4. Remove the thermostat
5. Remove the thermostat seat
6. Remove the oil dipstick
7. Remove the intake manifold
8. Remove the alternator
9. Remove the accessory drive belt lower idler pulley
10.Remove the compressor assembly
11. Remove the engine right mounting bracket.
a. Remove 3 fixing bolts (arrow) from right mounting
bracket.
(Tightening torque: 55 ± 5 N·m)
07
b. Remove the engine right mounting bracket.
12.Move away the knock sensor connector (arrow) from
knock sensor bracket.
13.Remove the knock sensor.
a. Remove the knock senor inner hexagon bolt (1).
(Tightening torque: 20 ± 5 N·m)
b. Remove the knock sensor cable fixing band (arrow)
from small circulation metal tube, and remove the
knock sensor.
14.Remove the small circulation metal tube.
a. Remove the small circulation metal tube fixing bolt (2).
(Tightening torque: 20 ± 5 N·m)
b. Remove the small circulation metal tube from engine.
80
07–
(See page 14-8).
(See page 14-10).
(See page 12-19).
(See page 12-22).
(See page 13-15).
(See page 10-24).
(See page 16-10).
(See page 31-99).
(See page 07-26).
Chery Automobile Co., Ltd.
(See page 07-70).
RT21070691
RT21070880
2
1
RT21070890