c. Remove 2 mounting bolts between steering gear and
sub frame.
(Tightening torque: 120 ± 10 N·m)
d. Slowly remove the steering gear with tie rod assembly.
Inspection
1. Check steering gear assembly housing for damage or deformation, and rack and pinion for sticking.
Replace the steering gear assembly if necessary.
2. Check if steering tie rod boot, clamp and clamping ring are normal. Replace if necessary to prevent water
and micro dust from entering and causing parts failure prematurely.
3. Check steering tie rod assembly and ball pin assembly for serious wear. Replace the steering tie rod
assembly or ball pin assembly if necessary.
Installation
Installation is in the reverse order of removal.
CAUTION
After installing the steering gear assembly, perform front wheel alignment procedure
Chery Automobile Co., Ltd.
29 - HYDRAULIC ASSIST STEERING
RT21290180
(See page
23-50).
29–
29
25