Chery T21 2014 Service Manual page 1269

Electronic Power Steering Column with Intermediate Shaft
Assembly
Removal
1. Set steering wheel to straight-ahead position.
2. Turn off all the electrical equipment and ignition switch.
3. Disconnect the negative battery cable.
4. Remove the driver airbag
5. Remove the steering wheel assembly
6. Remove the combination switch cover
7. Remove the spiral cable
8. Remove the combination switch assembly.
a. Disconnect the light combination switch connector (1)
and wiper and washer combination switch connector
(2).
b. Loosen the combination switch clamp and pull the
combination switch outward, then disconnect the
combination switch from the steering column to
remove the combination switch.
9. Remove the lower left protector assembly
10.Remove the brake pedal assembly
11. Remove 3 steering boot nuts (arrow) from the front baffle
plate, and then loosen the worm clamp (1) to separate
the steering boot from the front baffle plate.
(Tightening torque for nut: 10 ± 1 N·m)
(Tightening torque for worm clamp: 2 ± 0.5 N·m)
Chery Automobile Co., Ltd.
(See page 32-65).
(See page 28-10).
(See page 28-13).
(See page 32-67).
(See page
(See page 26-24).
1
3
2
45-19).
1
28 - STEERING COLUMN
2
RT21280230
100 120
80 140
60 160
40 180
20 200
km/h
0 220
E F
RT21280131
RT21280170
21
28–
28