Chery T21 2014 Service Manual page 766

16 - SQR484F CHARGING SYSTEM
Alternator
Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the engine lower right protector assembly
5. Loosen the accessory drive belt.
a. Put 15# open wrench (or socket) between engine and
right side-member, and tighten the tensioner pulley
bolt.
b. Rotate open wrench counterclockwise firmly indicated
by the arrow shown in the illustration. Loosen the
accessory drive belt (1) after it is slack.
6. Remove the alternator.
a. Move away the terminal cap, remove the fixing nut (1)
from alternator output cable, and move away the
alternator output cable.
(Tightening torque: 18 - 22 N·m)
b. Disconnect the alternator connector (2).
16
c. Remove 2 fixing bolts (arrow) from the alternator.
(Tightening torque: 20 + 5 N·m)
d. Remove the alternator from alternator bracket.
10
16–
(See page 10-10).
(See page 48-29).
Chery Automobile Co., Ltd.
1
RT21160060
1
2
RT21160070
RT21160080