Chery T21 2014 Service Manual page 451

Removal
CAUTION
 Be sure to wear necessary safety equipment to prevent accidents when repairing.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly
4. Remove the engine lower right protector assembly
5. Remove the accessory drive belt
6. Remove the belt tensioner assembly
7. Use an engine equalizer to hang the engine right lifting eye.
8. Remove the engine right mounting
9. Remove the timing belt front cover.
a. Loosen and remove 5 fixing bolts (arrow) from timing
belt front cover upper body, and remove the timing
belt front cover upper body (1).
(Tightening torque: 7 N·m)
b. Loosen and remove 6 fixing bolts (arrow) from
crankshaft pulley, and remove the crankshaft pulley
(1). 
(Tightening torque: 1st step: tighten to 25 ± 5 N·m;
2nd step: retighten by 30° ± 5°)
HINT:
Shift the transmission into 5th gear (for MT model) or
D position (for CVT model) when loosening the
crankshaft timing gear fixing bolt to engage the
crankshaft and propeller shaft. Another technician
depresses the brake pedal, which can lock the
crankshaft by mechanical gear train.
c. Loosen and remove the fixing bolt from accessory
drive belt lower idler pulley assembly, and remove the
accessory drive belt lower idler pulley assembly (1). 
(Tightening torque: 40 + 5 N·m)
d. Loosen and remove 6 fixing bolts (arrow) from timing
belt front cover lower body, and remove the timing belt
front cover lower body (2).
(Tightening torque: 7 N·m)
Chery Automobile Co., Ltd.
(See page 10-10).
(See page
(See page 07-24).
(See page 07-27).
(See page 07-68).
07 - SQR484F ENGINE MECHANICAL
48-29).
2
1
2
07
1
RT21070080
RT21070090
1
RT21070100
29
07–