Chery T21 2014 Service Manual page 669

c. Remove the oil pump assembly (2) and oil pump
assembly grommet (1) in order.
ENVIRONMENTAL PROTECTION
 Wasted engine oil pump should be handled by specialized department according to local laws and
regulations. Never discard it at will.
Installation
Installation is in the reverse order of removal. Pay attention to the following points during installation:
1. Replace the oil pump gasket and grommet.
2. Installation and alignment of oil pump:
 Align the plane (B) of oil pump assembly with plane
(A) of crankshaft as shown in the illustration.
 The relief valve (flange on the pump) (1) on oil pump
assembly is facing the outlet direction of cylinder
block frame, and the side with characters should face
upward.
 Apply a proper amount of seal gum to the bolt
mounting planes (arrow) before installing the oil pump
assembly fixing bolts.
Chery Automobile Co., Ltd.
13 - SQR484F LUBRICATION SYSTEM
1
A
A
1
2
RT21130240
13
B
B
RT21130250
RT21130260
25
13–