Chery T21 2014 Service Manual page 585

a. Loosen the worm clamp (arrow) and disconnect the
connection between front inlet hose and electronic
throttle assembly. 
(Tightening torque: 5 ± 0.5 N·m)
b. Disconnect the electronic throttle assembly connector
(arrow).
c. Loosen the elastic clamp, and disconnect the connection
between throttle body preheat water intake hose (1) and
electronic throttle assembly.
d. Loosen the hose clamp, and disconnect the connection
between throttle body preheat water outlet hose (2)
and electronic throttle assembly.
CAUTION
 After disconnecting throttle body preheat water inlet hose and outlet hose, cover the hoses with wooden
corks or equivalent to prevent coolant in hoses from flowing out.
 If your body contacts coolant accidentally, clean it with water immediately. If it is serious, please go to
hospital.
 DO NOT allow engine coolant enter electronic throttle assembly. If the coolant enters, wipe them with a
clean cotton yarn immediately.
ENVIRONMENTAL PROTECTION
 Wasted coolant should be handled by the specialized department according to local laws and
regulations. Never discard it at will.
e. Remove 4 fixing bolts (arrow) from the electronic
throttle assembly. 
(Tightening torque: 8 + 3 N·m)
f. Remove the electronic throttle assembly and its gasket.
Chery Automobile Co., Ltd.
10 - SQR484F INTAKE SYSTEM
RT21100180
2
1
RT21100190
RT21100200
10–
10
21