Chery T21 2014 Service Manual page 574

10 - SQR484F INTAKE SYSTEM
ON-VEHICLE SERVICE
Engine Trim Cover Assembly & Bracket
Removal
CAUTION
 Be sure to wear necessary safety equipment when repairing to prevent accidents.
 Try to prevent body paint surface from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the engine trim cover assembly.
a. Loosen the worm clamp (arrow) and disconnect the
connection between rear intake hose and hot wire air
flow meter. 
(Tightening torque: 5 ± 0.5 N·m)
10
b. Loosen the worm clamp (arrow) and disconnect the
connection between front intake hose and engine trim
cover assembly. 
(Tightening torque: 5 ± 0.5 N·m)
c. Remove the engine trim cover assembly from the
bracket.
10
10–
Chery Automobile Co., Ltd.
RT21100020
RT21100030
RT21100040