Ignition Starting Switch (w/o PEPS System)
Removal
CAUTION
Be sure to wear necessary safety equipment when repairing to prevent accidents.
Try to prevent vehicle protector from being scratched during removal and installation.
1. Turn off all the electrical equipment and ignition switch.
2. Disconnect the negative battery cable.
3. Remove the combination switch cover
4. Remove the ignition starting switch.
a. Move the wire harness connectors (arrow) away from
ignition starting switch.
b. Disconnect the ignition starting switch connector (1).
c. Remove the fixing screws (arrow) from ignition
starting switch.
(Tightening torque: 13 ± 2 N·m)
d. Remove the ignition starting switch.
Chery Automobile Co., Ltd.
(See page
28-13).
15 - SQR484F STARTING SYSTEM
RT21150140
1
RT21150150
15–
15
67