Dhcpv6 Options - Juniper ACX1000 Configuration Manual

DHCPv6 Options

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Figure 23: Switching Device Acting as an Extended Relay Server
NOTE: MX Series routers do not support DHCPv6.
DHCPv6 provides several options that can be used to insert information into the DHCPv6
request packets that are relayed to a server from a client. These options are equivalent
to the sub-options of DHCP option 82.
Option 37—Identifies the remote host. Option 37 is equivalent to the
sub-option of DHCP option 82.
Option 18—Identifies the interface on which the DHCP request packet was received
from the client. Option 18 is equivalent to the
Option 16—Identifies the vendor of the hardware on which the client is hosted. Option
16 is equivalent to the vendor-id
DHCPv6 options are not enabled automatically when DHCPv6 snooping is enabled on
a VLAN. They must be configured using the
Configuring DHCP Option 82 to Help Protect the Switching Devices Against Attacks
(CLI Procedure) on page 396
Setting Up DHCP Option 82 on the Switch with No Relay Agent Between Clients and
DHCP Server (CLI Procedure)
Chapter 11: Configuring DHCP and DHCPv6 Relay Agent
sub-option of DHCP option 82.
circuit-id
sub-option of DHCP option 82.
statement.
dhcpv6-options
remote-id
395