Lldp Operational Mode Commands - Juniper ACX1000 Configuration Manual

ACX Series Universal Access Router Configuration Guide
Related
Documentation

LLDP Operational Mode Commands

Related
Documentation
434
The physical topology configuration trap interval determines the period for which trap
notifications are sent to the SNMP Master Agent when changes occur in the global
physical topology statistics. This capability is disabled by default. The allowable range
is from 0 (disabled) through 3600 seconds. The LLDP agent sends traps to the SNMP
Master Agent if this interval has a value greater than 0 and there is any change during
the
lldp-configuration-notification-interval
including the ptopo-configuration-trap-interval
hierarchy level.
By default, LLDP generates the SNMP index of the interface for the port ID Type, Length,
and Value (TLV). Starting with Junos OS Release 12.3R1, you can generate the interface
name as the port ID TLV by including the
] hierarchy level. When configure the
lldp port-id-subtype
the remote LLDP neighbor, the
name in the Port ID field rather than the SNMP index of the interface, which is displayed
by default. If you change the default behavior of generating the SNMP index of the
interface as the Port ID TLV, you can reenable the default behavior by including the
statement at the
locally-assigned
LLDP Overview on page 431
LLDP Operational Mode Commands on page 434
Table 40 on page 434 summarizes the command-line interface (CLI) commands you can
use to monitor and troubleshoot the Link Layer Discovery Protocol (LLDP) protocol.
Commands are listed in alphabetical order.
Table 40: LLDP Operational Mode Commands
Task
Clear LLDP neighbor information.
Clear LLDP statistics.
Display basic LLDP information.
Display LLDP local information.
Display LLDP neighbor information.
Display LLDP remote global statistics.
Display LLDP statistics.
LLDP Overview on page 431
trap interval. You adjust this parameter by
statement at the
interface-name statement at the
interface-name
command displays the interface
show lldp neighbors
[edit protocols lldp port-id-subtype
Command
clear lldp neighbors
clear lldp statistics
show lldp
show lldp local-information
show lldp neighbors
show lldp remote-global-statistics
show lldp statistics
Copyright © 2017, Juniper Networks, Inc.
[edit protocols lldp]
[edit protocols
, statement on
hierarchy level.