ACX Series Universal Access Router Configuration Guide
Related
Documentation
Configuring LLDP in ACX Series
432
LLDP is a powerful way to allow Layer 2 devices to gather details about other
network-attached devices.
Configuring LLDP
Configuring LLDP in ACX Series on page 432
Tracing LLDP Operations
Example: Configuring LLDP
LLDP Operational Mode Commands on page 434
You configure LLDP by including the
[edit protocols]
hierarchy level. The complete set of LLDP statements follows:
lldp {
advertisement-interval seconds;
disable;
hold-multiplier number;
interface (all | interface-name) {
disable;
}
lldp-configuration-notification-interval seconds;
port-id-subtype {
interface-name;
locally-assigned;
}
ptopo-configuration-maximum-hold-time seconds;
ptopo-configuration-trap-interval seconds;
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
transmit-delay seconds
}
The following statements have default values:
advertisement-interval
—The default value is 30 seconds. The allowable range is from 5
through 32768 seconds.
—The default values is 4. The allowable range is from 2 through 10.
hold-multiplier
ptopo-configuration-maximum-hold-time
allowable range is from 1 through 2147483647 seconds.
—The default values is 2 seconds. The allowable range is from 1 through
transmit-delay
8192 seconds.
statement and associated parameters at the
lldp
—The default value is 300 seconds. The
Copyright © 2017, Juniper Networks, Inc.