Juniper ACX1000 Configuration Manual page 496

Junos os; acx series universal access router
Hide thumbs Also See for ACX1000:
Table of Contents

Advertisement

ACX Series Universal Access Router Configuration Guide
Table 41: Protocol Destination MAC Addresses
Protocol
802.1X
802.3ah
Cisco Discovery Protocol (CDP)
Ethernet local management interface (E-LMI)
MVRP VLAN Registration Protocol (MVRP)
Link Aggregation Control Protocol (LACP)
Spanning Tree Protocol (STP), Rapid Spanning Tree
Protocol (RSTP), and Multiple Spanning Tree
Protocol (MSTP)
Link Layer Discovery Protocol (LLDP)
Multiple MAC Registration Protocol (MMRP)
VLAN Trunking Protocol (VTP)
Related
Documentation
438
When a Layer 2 control PDU is received on a service provider edge port configured for
L2PT, the multicast destination MAC address is rewritten with the predefined multicast
tunnel MAC address of
01:00:0c:cd:cd:d0
network transparently to the other end of the tunnel and the original multicast destination
MAC address is restored when the packet is transmitted.
If a packet is received on a tunnel interface that already has a destination multicast MAC
address of
01:00:0c:cd:cd:d0
the error condition, the administrator must enter the
interface interface-name
command.
L2PT can be configured on the customer edge aggregated Ethernet interface using
CLI command at the [edit protocols layer2-control] hierarchy level.
mac-rewrite
The destination MAC address used by different protocols is listed in
Ethernet Encapsulation
Ether (0x888E)
Ether (0x8809)
LLC (0xAAAA03)
Ether (0x88EE)
Ether (0x88F6)
Ether (0x8809)
LLC (0x424203)
Ether (0x88CC)
Ether (0x88F5)
LLC (0xAAAA03)
Layer 2 Control Protocol on ACX Series Routers on page 404
Configuring Layer 2 Protocol Tunneling on ACX Series on page 441
Checking for a MAC Rewrite Error Condition Blocking Layer 2 Interface in ACX Series
on page 442
Clearing a MAC Rewrite Error Condition Blocking a Spanning-Tree Instance Interface
in ACX Series on page 442
. The packet is transported across the provider
, the port enters an error state and is shut down. To clear
clear error mac-rewrite
Table 41 on page
MAC Address
01:80:C2:00:00:03
01:80:C2:00:00:02
01:00:0C:CC:CC:CC
01:80:C2:00:00:07
01:80:c2:00:00:21
01:80:C2:00:00:02
01:80:C2:00:00:00
01:80:C2:00:00:0E
01:80:C2:00:00:20
01:00:0C:CC:CC:CC
Copyright © 2017, Juniper Networks, Inc.
438:

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Acx5048Acx5096Acx500Acx1100Acx2000Acx2100 ... Show all

Table of Contents